ARCO Stud Welding Ltd

CD 200 Studwelding Equipment

The CD 200 Range

Equipment configured to suit varios power output requirements.

CD 200 /44
CD 200 /66
CD 200 /99
Can be fitted with various attachments designed to meet varying production setup requirements.

Model 88 will be replaced by Model 99
No Price Increase Applies

COMPACT AND PORTABLE.
Using the latest inverter technology means that the controller weight is less than half that of many other conventional CD welding machines making the equipment easily portable.
IMPROVED WELDING RESULTS.
Large capacitors result in a slow discharge and improved arc melt leading to better weld strength, improved reverse marking and reduced weld spatter.
REDUCED NOISE.
The softer nature of the discharge action generates less noise. Fitting a nose cone rather than the standard tripod leg assembly will reduce noise even further.
ACCURATE & EASY ADJUSTMENT.
Digital displays allow for accurate monitoring of all functions. A stabilized circuit maintains voltage irrespective of input fluctuations.
INTELLIGENT CONTROLLER.
The controller can automatically sense and adjust for varying voltages from 100 - 250 volts AC and for different mains frequencies from 50 - 100Hz. It can also sense and adjust accordingly for hand tools on stud or shroud ignition.
QUALITY & RELIABILITY.
The CD200 controllers have a strong, robust construction comprising of an aluminium cage within an outer steel case. Recessed front and rear panels protect the dials and plugs. The use of soak tested components ensure maximum durability and a long working life.
INCREASED PROFITS.
The rapid welding action substantially reduces the weld time. There is no requirement for a transformer thus a large fan is not required to disperse heat. A dramatic improvement in dust ingress reduces problems with electronic failure caused by tracking and overheating.
TESTED TO THE HIGHEST LEVEL.
The EU issues a directive that all Arc Welding Equipment must be certified to the product standard for electromagnetic compatibility. Using a N.A.M.A.S. accredited test house, the CD200 has undergone the highest level of testing to ensure all requirements are met. Every equipment has it own EC Declaration of Conformity and has full CE marking.
SAFETY AND PROTECTION.
Two independent circuits prevent unintentional firing. One circuit senses the absence of resistance between the stud and work piece whilst the other circuit requires the nose cone tripod legs or the stud to be in electrical contact. The equipment will failsafe in the unlikely event of a component failure.