Profile Eliminate Problems Advantages Fasteners Typical Applications Contact our Office News MAIN PRODUCT MENU

The CD Process CD 200 Equipment CD 200 Features CD Handtools Drill Stands & Benches CNC Autofeed Systems CD Studs Accessories

The Drawn Arc Process DA Equipment DA Handtools DA Applications DA Studs   Short Cycle Equipment

Product Menu

Accessories 1

Accessories 2

Accessories 3

Accessories 4

Return to Accessories

NOSE CONE ASSEMBLIES:
..are used to accurately locate studs when using templates. These are available in 3 diameters: 30mm (standard), 1" and 22mm. Nose cones can be cut to fit around complex shapes or manufactured with extended "chimney" to locate inside high sided narrow components such as deep channels or - to totally enclose the weld area for noise reduction.

Pt No's	Assembly	End Cap	Nose Cap	Spacers
30mm	79-101-070	79-101-051	79-101-072	79-101-071
1"	79-101-069	79-101-051	79-101-077	79-101-071
22mm	79-101-068	79-101-051	79-101-078	79-101-076

SCREW IN NOSE CONES:
..allow welding of studs through templates with different diameter holes. These nose cones are available in 3 diameters: 30m,m, 1" and 22mm.
They also allow replacement of worn nose cones without the need to
re-centre the nose cone in relation to the chuck.

Pt Nos	Assemby	Cup-Only	Rod-Only
3mm	79-171-114	79-171-118	79-171-115
1"	79-171-113	79-171-117	79-171-115
22mm	79-171-112	79-171-116	79-171-115

TESTING NOZZLES:
Should be used in conjunction with the DIN tester bending bar
Part No:79-171-121 for the mechanical testing of welded studs in accordance with DIN 267 part 5.

M3 Nozzle	M4 Nozzle	M5 Nozzle
79-171-123	79-171-124	79-171-125
M6 Nozzle	M8 Nozzle	M10 Nozzle
79-171-026	79-171-128	79-171-130

CENTERING JIGS:
should be used to centre the nose-cone with respect to the chuck. Accuracy of +/- 0.25mm is possible. Centering jigs are available as complete assemblies or as separate parts as detailed in the table.