Drawn
Arc Weldstuds
It is our aim to provide a quality product
in the shortest time possible. As a distributor only of selected quality
products, we are able to respond to the most urgent requirements of
our customers, offering not only Standard Weld Studs, but also Special
Design
Studs & Fasteners.
In an emergency, you will find our
service is second to none.
We offer technical advice and pre-production samples.
Mild Steel DA Weld Studs are manufactured
from high quality weldable grade Carbon Steels, with certification available
on request.
All threads are mid rolled, ensuring that the flow line of the material
is not interrupted. The surface quality is considerably improved, and the
strength doubled. In addition, the thread offers better resistance in terms
of both contusion and wear. Metric thread forms comply with BS3643 pt2.
Medium fit 6G.
In bar form, the material has strength designation of 4.7 rot BS6392. The
U.T.S. increases slightly after thread rolling. Stainless Steel conforms
to BS970 part 3 - either 316S11 or 304S11, depending on requirements.
All Drawn Arc Weld Studs are fluxed. The type and amount used is an essential
factor in ensuring consistent and high quality welds. DA Weld Studs feature
a pointed flux ball. This aids accurate and swift location of the stud to
the parent material. Suitable ceramic ferrules are included with all Drawn
Arc Studs.
Sizes range from M4 up to M30, in either self-colour
or anti-corrosion plate (including Zinc, Copper, Nickel plate and Galvanisation).
"Tapped Bosses" are available with internal threads ranging from
M3, through to M20
As with our Standard Drawn Arc Studs, Bosses and Plain Studs are available
as self-colour or plated.
Range includes sizes between 3mm and 8mm diameter, threaded or plain.
